This online calculator answers question "how to choose" humidifier, by calculating humidification requirements given initial and target relative humidity and building parameters

### This page exists due to the efforts of the following people:

#### Timur

Created: 2012-12-19 14:55:03, Last updated: 2021-03-03 07:55:04

This online calculator answers question "how to choose humidifier", by calculating humidification requirements given initial and target relative humidity and building parameters.

The calculations were made possible after the creation of Relative humidity to absolute humidity and vice versa calculators.
Now, to use the calculator, it is important to understand the logic behind calculating humidification load.

For home humidifiers manufacturer usually specifies the volume of the air processed by the humidifier per hour as its capacity. Like, 180 cubic meters per hour.

Well, this is quite useless. The true specification of humidifier you should look for is the speed of humidification, i.e., how much water it can add to the air per hour. If you are determined enough, you will find it. At least you can measure it by yourself if you already have a humidifier.

Why is it per hour? Because your apartment isn't in a vacuum, and you have intake and exhaust air. Otherwise, you'd die without the oxygen, wouldn't you? The airflow is characterized by air changes per hour, ACH. For apartments, this value is usually quite low, between 0.1 and 0.5. This calculator uses 0.5, which means that air completely renews for 2 hours. This is quite good value, actually.

So, because air constantly renews, humidifiers should constantly add the water amount enough to close the gap between initial relative humidity and target relative humidity.

And here go the calculations.

1. Volume of air to be humidified
For this, we need apartment volume and air changes per hour. They give us the volume of air replaced each hour.
2. Water to be added by the humidifier
For this, we need temperature, initial relative humidity, and target relative humidity. They give us initial absolute humidity and target absolute humidity. The difference is the amount of moisture to be added per cubic meter, then multiplied by air volume to be humidified. This will give us the amount of water to be added to the air each hour. Knowing this, we can compare it with the humidifier's speed and see if it fits our requirements.

The calculator below implements the abovementioned calculations.

#### Humidification requirements

Digits after the decimal point: 3
Air volume per hour, cubic meters

Initial absolute humidity, kg/cubic meter

Target absolute humidity, kg/cubic meter

Water to be added each hour, kg/hour

URL copied to clipboard