# Density of oil

Recalculation of density of oil for different temperature and pressure values. Formulas are taken from Russia's GOST R 8.610-2004. "State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation" standard

Recalculation of density of oil for different temperature and pressure values. Formulas are taken from Russia's GOST R 8.610-2004. "State system for ensuring the uniformity of measurements. Density of oil. The tables for recalculation" standard. Used formulas are listed below the calculator.

Density of oil at given temperature and pressure is expressed via density of oil at 15 deg C and zero overpressure - temperature correction coefficient, calculated according to the formula

- overpressure correction coefficient, calculated according to the formula

Density of oil at 20 deg C and zero overpressure is calculated according to the formula

Coefficient of volumetric expansion at 15 deg C is calculated according to the formula

,

where ,

Coefficient of volumetric expansion at given temperature is calculated according to the formula

Compression coefficient is calculated according to the formula

If areometer is used, its readings are corrected using temperature correction coefficient for areometer glass. Thus, measured density is calculated as

,

where , = 20, if areometer is graduated at 20 deg C and 15, if areometer is graduated at 15 deg C.

#### Similar calculators

- • Petroleum product density
- • Saturation vapour pressure
- • Relations between the mass, the length, the width and the area density (surface density) of the fabric
- • Clapeyron-Mendeleev equation. The relationship between the number of moles of gas, the temperature, volume and pressure.
- • Calculation of weight by volume
- • Engineering section ( 55 calculators )

## Comments